Onkyo TX-NR545 - Display and OSD; The Display Does Not Light; The On­screen Menus Do Not Appear

DisplayandOSD
Thedisplaydoesnotlight
 MakesurethatDimmerfunctionisnotworking.PressDIMMERbutton
andchangethebrightnesslevelofthedisplay.
 ThedisplayisturnedoffwhenthePureAudio(European,Australianand
Asianmodels)listeningmodeisselected.
Theonscreenmenusdonotappear
 OnyourTV,makesurethatthevideoinputtowhichthisunitisconnected
isselected.
 Set"TVOut""ImposeOSD"to"On".
 (European,Australian,TaiwaneseandAsianmodels)Theguidance
displayedontheTVscreen(OSD)arenotdisplayedwhentheOSD
languageissettoChineseiftheinputselectoris"NET"or
"BLUETOOTH".Operatebyconfirmingthedisplayonthemainunit.Note
thatthedisplayonthemainunitdoesnotsupportthedisplayofChinese
characters.Charactersthatcannotbedisplayedarereplacedwith
asterisks( ).
Troubleshooting