Onkyo TX-NR545 - Multi­zone Function; There Is no Zone Output from the Connected Player

MultizoneFunction
Thereisnozoneoutputfromtheconnectedplayer
 Withmultizonefunction,soundisoutputonlywhenthesignalinput
sourceisanexternalcomponentconnectedtotheanalogaudioinput
jacks,"NET","BLUETOOTH","AM"or"FM".Multizoneoutputisnot
possibleiftheplayerandtheunitareconnectedviaHDMIcable.
ConnecttheplayerusingRCAcable.Also,someplayersrequireaudio
outputsetting.
 Onlyanalogaudiosignalscanbeoutputfromanexternalcomponentto
Zone2.
 Whenthe"NET"inputsourceisselected,DSDandDolbyTrueHDaudio
signalscannotbeoutputtoZone2.
Troubleshooting