Onkyo TX-NR545 - Page 110

YoucanresettheremotecontrolcoderegisteredintheREMOTEMODE
buttontoitsdefaultstatus.Thisoperationcanbeexecutedonasingle
REMOTEMODEbutton.
1. PressandholdQfor3ormoresecondswhileholdingdownthe
REMOTEMODEbuttonyouwanttoreset.
 Theremoteindicatorwilllight.
2. Within30seconds,presstheREMOTEMODEbuttonagain.
 Resettingiscompletewhentheremoteindicatorflashestwice.
Toresetalltheremotecontrollersettings:Whileholdingdown
RECEIVER,pressandholdQfor3ormoresecondsuntiltheremote
indicatorstayslit.Within30seconds,pressRECEIVERagain.Resettingis
completewhentheremoteindicatorflashestwice.