Onkyo TX-NR545 - Page 126

 Theremoteindicatorwilllight.
 TheRECEIVERandZONE2buttonscannotbeprogrammed.
2. Withthenumberbuttons,enterthefollowing5digitremotecontrolcode
within30seconds.
RIDock:81993
CassettetapedeckwithRIjack:42157
 Programmingiscompletewhentheremoteindicatorflashestwice.
Theremoteindicatorflashesonceslowlywhenprogrammingthe
remotecontrolcodefails.Tryprogrammingagain.
InputselectorontheRIDock:Switchto"DOCK"or"TAPE".Fordetails,
refertotheRIDock'sinstructionmanual.
TooperateOnkyocomponentsdirectlyorOnkyocomponentsthatarenot
connectedviaRI,usethefollowingremotecontrolcodes:
OnkyoDVDplayer:30627
OnkyoCDplayer:71817
RIDock:82990
 Withsomemodels,operationmaybenotpossibleinpartornotpossible
atall.