To make a network share visible in the Source or Destination selection lists in a
job setup screen, first add and mount the share from the Sources or Destinations
buttons on the Main screen.
6. To change the common settings, tap the 4 or Common Settings heading.
Select up to two hash types of MD5, SHA-1, and SHA-256. Some hash types will
be disabled for certain image file formats such as ex01 and e01.
Error Granularity defines the granularity of failed reads from the source drive.
The default setting of Standard attempts to recover data down to a 32 kB
resolution. The Exhaustive setting attempts to recover data down to a single
sector.
Note: The default error granularity setting is Standard, which will result in
a minimum chunk of 32kB of source data (64 sectors for a 512B sector
drive) that will get skipped and filled with zeros upon completion of the
attempted reads (assuming no reads were successful). If this condition is
encountered, consider changing the error granularity setting to be
Exhaustive, which will result in repeated read attempts of the error region
with decreasing sector sizes. This will maximize the amount of recoverable
data and minimize the sectors that get skipped and filled with zeros.
4.3. Duplicating
ISTX240300-UGD-EN-1
User Guide
91
To Next Page
Loading...
