C200 HARDWARE
Instruction Manual C200 Part1 A1.doc
optek Danulat GmbH • D-45356 Essen • Germany
page 14
3.5 19” Rack Mounting Control 200
19” rack mounting (3 HE / 21 TE) can be achieved by means of an additional front plate (128.4 x 106.4 mm)
with cut out (92.6 x 92.6 mm). Installation procedure is as described in Section 3.4. Dimensions of the front
plate (PN: 1200-3333-0001-00) are shown as follows:
To Next Page
Loading...
