Optek CONTROL 200 - Single Input Redox (ORP)

C200 SOFTWARE
Instruction Manual C200 Part2 A1.doc
optek Danulat GmbH • D-45356 Essen • Germany
page 12
2.1.2.3 Single Input Redox (ORP)
Measured Values
Millivolts.
Temperature.
Note. If Probe Type is set to ORP (see Section 5.1.3), the lower display line shows
Monitoring ORP.
Sensor A Offset
Displays the offset value for the sensor set in A: Adjust Offset – see Section 4.1.3.
Alarm 3 set to Wash (A3: Type, Section 5) – see Section 2.1.2.6
Alarm 3 not set to Wash.
Monitoring Redox
404
mV
25.6
Deg.C
A: mV Offset
0
mV
Wash Function
Dual Redox