Optek CONTROL 200 - C200 H Ardware; Table of Contents

C200 HARDWARE
Instruction Manual C200 Part1 A1.doc
optek Danulat GmbH • D-45356 Essen • Germany
page 4
Table of contents page
1 Converter description 5
2 Technical Data 6
2.1 General data 6
2.2 pH – C210, C211 and C221 8
2.3 Conductivity - C220, C221 and C222 9
2.4 Control 200 – configuration feasibilities 10
3 Mechanical installation 11
3.1 Front panel CONTROL 200 11
3.2 Back panel CONTROL 200 12
3.3 Dimensions Control 200 13
3.4 Front panel mounting 13
3.5 Rack mounting Control 200 14
4 Field wiring schematic 15
4.1 General instructions 15
4.2 Relay Contact Protection and Interference suppression 16
4.3 Sensor wiring 17
4.3.1 Wiring of conductivity sensors 17
4.3.2 Wiring of pH sensors 18
5 Start-up / Maintenance 19
5.1 Start-up 19
5.2 Preventive maintenance / repair 20
5.3 Spare parts 20
6 Fax-Reply Form 21