159
Appendix A • Maintenance
Note: opening the OS1p case voids the warranty!
Your OS1p contains no user serviceable components. Please contact your closest
authorized agent for periodic preventative maintenance information. The only
component that requires calibration every two years, is the PAR Clip. Fluorometers
by themselves, do not require calibration
The Nickel Metal Hydride battery that is supplied with the OS1p, is a very reliable type
of battery. It exhibits no memory effects whatsoever. It is recommended that when the
system is not in use, even for very long periods of time, that the charger should be
plugged into the OS1p and into a wall outlet for continuous charging. Prolonged periods
of discharge will significantly decrease it’s life span. Please contact Opti-Sciences if you
have any questions concerning proper long term storage.
To Next Page
Loading...
