Oracle Database Appliance X6-2-HA Service Manual

Install Replaceable Components in Motherboard Assembly
1.
Attach an antistatic wrist strap.
See “Performing Electrostatic Discharge and Antistatic Prevention Measures” on page 146.
2.
Install the following components into the server node.
■
Fan modules
See “Install a Fan Module” on page 161.
■
Boot disk drives
See “Install a Boot Drive” on page 158.
■
Memory modules (DIMMS)
See “Install DIMMs” on page 174.
■
PCIe riser and attached PCIe cards
See “Install PCIe Riser in Server Nodes” on page 179.
■
CPUs
See “Install Processor (CPU)” on page 201.
■
Internal primary HBA PCIe card
See “Install Primary HBA PCIe Card in Motherboard” on page 188.
3.
Reconnect and install the following cables.
■
Fan module power cables.
See “Servicing the Fan Power Cables (FRU)” on page 227.
■
Internal PCIe card data cables.
See “Servicing the PCIe Card Cables (FRU)” on page 230.
Caution - Equipment damage. The disk drive data cables are delicate. Handle them carefully.
■
Boot disk backplane cables.
See “Servicing the Boot Disk Backplane Cables (FRU)” on page 237.
4.
Return the server node to operation.
a.
Install the server node top cover.
See “Installing the Server Node Top Cover” on page 245.
b.
Install the server node into the system.
See “Installing a Server Node Into the System Chassis” on page 246.
244 Oracle Database Appliance Service Manual • November 2017

Oracle Database Appliance X6-2-HA Specifications

General

Brand	Oracle
Model	Database Appliance X6-2-HA
Category	Storage
Language	English