Oracle ZFS Storage Appliance Service Manual

Setting a Threshold Alert for SSD Endurance (CLI)
Setting a Threshold Alert for SSD Endurance (CLI)
Use the following procedure to set a threshold alert for SSD endurance.
1.
To set a threshold alert for SSD endurance, use the following CLI commands:
hostname:configuration alerts> thresholds
hostname:configuration alerts thresholds> create
hostname:configuration alerts threshold (uncommitted)> set
statname=ssd.endurance[ssd]
statname = ssd.endurance[ssd] (uncommitted)
2.
To list the properties of the threshold alert, use the following CLI command:
hostname:configuration alerts threshold (uncommitted)> list
Properties:
uuid = <generated on commit>
statname = ssd.endurance[ssd] (uncommitted)
type = normal
limit = (unset)
minpost = 5 minutes
days = all
window_start = none
window_end = 00:00
frequency = 5 minutes
minclear = 5 minutes
Note - The remaining fields are set the same way you would set them for any other threshold
alert.
Viewing CPU Details (CLI)
Use the following procedure to view CPU details.
To view CPU details, use the following CLI commands:
hostname:maintenance hardware> select chassis-000
hostname:maintenance chassis-000> select cpu
hostname:maintenance chassis-000 cpu> select cpu-000
hostname:maintenance chassis-000 cpu-000> show
Getting Started with Servicing the Hardware 29

Oracle ZFS Storage Appliance Specifications

General

Brand	Oracle
Model	ZFS Storage Appliance
Category	Storage
Language	English