Oracle ZFS Storage Appliance Service Manual

Viewing and Clearing CPU Faults from ILOM
Before You Begin
This procedure requires that you know the administrative account name and password (defaults
are root and changeme), and that you know the IP address or host name of the controller
Service Processor (SP).
1.
Using a Secure Shell (SSH) session, log in to Oracle ILOM by specifying your
administrative account user name and the IP address or host name of the
controller SP.
Examples:
ssh-l username host
ssh username@host
where host is either the IP address or host name of the controller SP when using DNS. For
example: ssh root@172.16.82.26
2.
Type the password for the administrative account.
Oracle ILOM displays a default command prompt (->), indicating that you have successfully
logged in.
Viewing and Clearing CPU Faults from ILOM
Use the following procedure to view and clear CPU faults from ILOM.
Before You Begin
Log in to the server as root using the ILOM CLI.
1.
To view server faults, use the following CLI command:
-> show /SP/faultmgmt
2.
To clear a CPU fault, use the following CLI command:
-> set /SYS/MB/Pn clear_fault_action=true
Are you sure you want to clear /SYS/MB/Pn (y/n)? y
Understanding Hardware Status
To understand hardware status, use the following sections.
■
“Locating the Chassis Serial Number” on page 34
Getting Started with Servicing the Hardware 33

Oracle ZFS Storage Appliance Specifications

General

Brand	Oracle
Model	ZFS Storage Appliance
Category	Storage
Language	English