Oracle ZFS Storage Appliance Service Manual

Upgrading Software on a Standalone Controller (BUI)
Upgrading Software on a Standalone Controller
(BUI)
Use the following procedure to upgrade software on a standalone controller.
Before You Begin
On your local system, download the software update.
1.
Go to Maintenance > System.
2.
Click the add icon next to Software Updates.
3.
Click Browse and locate the pkg.gz update file previously downloaded..
A progress bar indicates the progress of the media being uploaded, unpacked, and verified.
Note that on some older browsers, the progress bar may not be updated continuously during
the upload; if you see a "watch" cursor, wait a minute -- in the worst case the upload will
proceed all the way to completion and you may not see the progress bar. After the media is done
uploading, it is automatically unpacked and verified.
Upgrading the Software 323

Oracle ZFS Storage Appliance Specifications

General

Connectivity	10GbE, 40GbE, InfiniBand, Fibre Channel
Protocols	NFS, SMB, iSCSI, Fibre Channel, HTTP
Operating System	Oracle Solaris
Data Protection	snapshots, clones, remote replication
Data Reduction	Inline compression, deduplication
High Availability	Redundant hardware components (controllers, power supplies, fans). Automatic failover between controllers. Hot-swappable drives and components. Cluster configurations for increased availability and scalability.
Management Interface	Web-based GUI, CLI, REST API
Storage Type	Hybrid (SSD + HDD), All-Flash
Storage Capacity	Up to several petabytes
Encryption	AES-256 encryption at rest