Oracle ZFS Storage Appliance Service Manual

Performing the Initial Setup
You can repeat the initial setup process after you have already configured the appliance for
the first time, as described in “Configuring the Appliance for the First Time” in Oracle ZFS
Storage Appliance Installation Guide. This does not change any of the current settings unless
explicitly requested. User data on the storage pool (including projects and shares) is not
affected.
To perform an initial setup:
■
BUI: Click the Initial Setup button on the Maintenance > System screen.
■
CLI: Enter the maintenance system context, then enter the setup command.
Performing the Initial Setup 301

Oracle ZFS Storage Appliance Specifications

General

Connectivity	10GbE, 40GbE, InfiniBand, Fibre Channel
Protocols	NFS, SMB, iSCSI, Fibre Channel, HTTP
Operating System	Oracle Solaris
Data Protection	snapshots, clones, remote replication
Data Reduction	Inline compression, deduplication
High Availability	Redundant hardware components (controllers, power supplies, fans). Automatic failover between controllers. Hot-swappable drives and components. Cluster configurations for increased availability and scalability.
Management Interface	Web-based GUI, CLI, REST API
Storage Type	Hybrid (SSD + HDD), All-Flash
Storage Capacity	Up to several petabytes
Encryption	AES-256 encryption at rest