Panasonic CZ-CFUNC2 - Page 63

ー 61 ー
Operating Instructions Intelligent Controller
30
Check the status of air conditioning units
Operation/Status
3
Change the settings.
z The settings are registered and the “Vent.” dialogue closes.
3
1
Put a check mark in the “Select” column.
z Select the indoor units whose settings you want to change. z You can select multiple indoor units.
1
2
Touch [Vent.].
z The “Vent.” dialogue is displayed.
2
Changing the settings for ventilation output
Checking the operational status of indoor units
31
Check the status of air conditioning units
Operation/Status
3
Change the settings.
z A conrmation message appears.
3
Note
y This setting is linked with “I/D unit demand settings”. (→
“Demand settings on the indoor unit” (P.89))
4
Touch [Yes].
z The setting is registered.
1
Put a check mark in the “Select” column.
z Select the indoor units whose settings you want to change. z You can select multiple indoor units.
1
2
Touch [Demand].
z The “Demand setting” dialogue is displayed.
2
Checking the operational status of indoor units
Changing the demand control settings
Switch between setting and cancelling demand control. Refer to “Demand settings on the indoor unit” (P.89) for information about demand control.
TGR-318_ENG.indb 61 2017/04/06 10:42:59