EasyManua.ls Logo

Panasonic CZ-CFUNC2 - Page 65

Panasonic CZ-CFUNC2
179 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ー 63
Operating Instructions Intelligent Controller
34
Check the status of air conditioning units
Operation/Status
3
Set the demand operating range.
[No settings] The demand operation setting is cancelled.
[FrceStop] Demand operation is forcibly stopped.
[ON XX%]
(Demand values)
Use
and to select an available
demand value for the selected outdoor unit.
y If multiple outdoor units are selected, the
demand values common between them are
displayed.
4
Touch [Transmit].
z The settings are changed and the “Demand” dialogue is
closed.
z To cancel the settings, touch [Cancel].
1
Put a check mark in the “Select” column.
z Select the outdoor units whose settings you want to
change.
z You can select multiple outdoor units.
1
2
Touch [DmndStng].
z The “Demand” dialogue is displayed.
2
Checking the operational status of the outdoor unit
Changing the demand control settings
35
Check the status of air conditioning units
Operation/Status
Checking on current alarms
You can check the indoor unit names, alarm codes, and dates and times of occurrence and recovery for
alarms that have occurred in the air conditioning system in a list. You can also do things such as output
the alarm list in CSV format and check the alarm log.
1
Touch [Operation/Status] in “Oper./
Status”.
1
2
Touch [Alarm list].
z The “Alarm list” screen is displayed.
2
3
Checking on current alarms. (P.36)
TGR-318_ENG.indb 63 2017/04/06 10:43:01

Table of Contents

Other manuals for Panasonic CZ-CFUNC2

Related product manuals