Panasonic DP-8020E - Page 54

54
SEP 2006
Ver. 1.0
DP-8020E/8020P/8016P
(23) Open the ADF Unit.
(24) Remove 4 Screws (6A).
Caution:
Don’t close the ADF Unit subsequent to this step.
(25) Remove the ADF Unit.
(26) Disconnect 5 Harnesses (2848, 2849, 2850,
2851) on the ADF PC Board. (5 connectors)
(27) Remove 2 Screws (19).
(28) Remove the ADF PC Board (2846).
(29) Release the Harness from the Clamp.
(30) Disconnect 2 Harnesses (2848, 2850).
(31) Remove 7 Screws (19).
(32) Remove the Motor Bracket (1906) Assembly.
Note:
When reassembling the Motor Bracket (1906)
Assembly, follow the step sequence as illustrated.