10.5 Practical Use for Home Return
10.5.1 Using Home Input Only
■
Connection
The home input switch is connected. No near home input switch is connected.
■
Input logic settings
Set parameters to satisfy the following conditions.
● Home input logic: NO contact
● Near home Input logic: NC contact
■
Operation
● When home return is started, the motor rotates in the direction of home return.
● The motor rotates at the startup speed. At this time, the near home input is already ON due
to the input logic setting.
● The motor stops when the home input turns ON and becomes valid.
10.5 Practical Use for Home Return
WUME-GM1PG-01 10-13
To Next Page
Loading...
