Panasonic GM1 Series - Connection of Servo on Output

3.6 Connection of Servo ON Output
● This is an example showing the connection of the servo ON to the servo amplifier.
● An external power supply (+5 V DC to +24 V DC) must be provided for the connection.
Connection Unit
Servo ON
(Open collector)
Power supply
If 15 mA is exceeded
a registor must be
added.
Motor driver
Output specifications
Output form Open collector
Operating voltage range
Max. load current
ON Max. voltage drop
GND +5 to +24V DC
B7,B16
1V
10 mA
4.75 26.4V DC
B5,B14
3.6 Connection of Servo ON Output
WUME-GM1PG-01 3-15