Panasonic GM1 Series - Page 49

Parameter Default Set value
LimitInputLogic (Over limit input
logic)
Normal Close Normal Close
Normal Open
SShapedPattern (S-shaped pattern) Sine curve Sine curve
Cubic curve
PulseInOutMultiplication (Pulser
input, pulse output transfer multiple)
x1 x1
x2
x5
x10
x50
x100
x500
x1000
StartupSpeed (Startup speed [u/s]) 0 0 to 4294967295
PulseInputAorBSignalInCnst (Pulse
input A/B signal time constant)
Not InCnst Not InCnst
0.1 us
0.5 us
1.0 us
2.0 us
10.0 us
OriginInputInCnst (Home input time
constant)
Not InCnst Not InCnst
10.0 us
100.0 us
4.3 List of Pulse_4Axes Parameters
WUME-GM1PG-01 4-7