121
5. 4K Photo and Drive Settings
• The burst speed may become slower depending on the following settings.
– [Picture Size]/[Quality]/[Sensitivity]/Focus Mode/[Focus/Release Priority]
• When the burst rate is set to [H] (when the focus setting is [AFS] or [MF]), the exposure will be
set to that of the first picture. In other cases, the exposure will be adjusted for each picture.
• It may take time to save pictures taken in Burst Mode on the card. If you take pictures
continuously while saving, the maximum number of recordable pictures decreases.
For continuous shooting, use of a high speed memory card is recommended.
• We recommend using the shutter remote control (DMW-RS2: optional) when you want to
keep the shutter button pressed fully while taking pictures in Burst Mode.
Not available in these cases:
• Burst recording does not work in the following cases:
– [Glistening Water]/[Glittering Illuminations]/[Handheld Night Shot]/[Soft Image of a Flower]/
[Panorama Shot] (Scene Guide Mode)
– [Rough Monochrome]/[Silky Monochrome]/[Miniature Effect]/[Soft Focus]/[Star Filter]/
[Sunshine] (Creative Control Mode)
– When recording using the flash
– When using [Multi Exp.]
To Next Page
Loading...
Need help?
General
