Panasonic Lumix S1H

6. Drive/Shutter/Image Stabiliser
142
You can select pictures from the 6K/4K burst files and save them.
0 When continuing to select pictures from the Auto Review after recording
6K/4K photos, start the operation from either Step
2
or
3
.
1
Select a 6K/4K burst file on the
playback screen. (l 347)
≥Select an image with the [ ] or
[ ] icon and then press 3 .
≥You can also perform the same
operation by touching [ ] or
[].
0
If the images were recorded with [6K/4K Pre-Burst], proceed to Step
3
.
3
Select the frame to save.
≥Drag the picture selection slide view
B.
≥You can also perform the same
operation by pressing 21.
0 To continuously rewind or forward frame-
by-frame, touch and hold [ ]/[ ].
Selecting Pictures from a 6K/4K Burst
File
2
Roughly select the scene.
≥Drag the slide bar A.
0
For information about how to use the
picture selection slide view screen, refer
to page 144.
0 If the images were recorded with [6K/4K
Burst] or [6K/4K Burst(S/S)], touching
[ ] allows you to select the scene in
the 6K/4K burst playback screen. (l 146)
Picture selection slide view
screen