Panasonic Lumix S1H

6. Drive/Shutter/Image Stabiliser
179
Image Stabiliser Settings
Set the image stabiliser operation to match the recording situation.
¨ [ ] ¨ [ ] ¨ Select [Image Stabilizer]
[Operation Mode]
Sets the stabilisation movement (blur) to match the
recording method (normal, panning). (l 181)
[Body(B.I.S.) /
Lens(O.I.S.)]
[ ] ([Body]) Uses the in-body image stabiliser.
[ ] ([Lens]) Uses the in-lens image stabiliser.
0 This can be set when using other manufacturer’s lenses
with an image stabilisation function.
[When to Activate]
[ALWAYS]
The image stabiliser is always
operating.
[HALF-
SHUTTER]
The image stabiliser operates when the
shutter button is pressed halfway.
[E-Stabilization
(Video)]
Camera shake during video recording is corrected along
the vertical, horizontal, roll, pitch, and yaw axes through the
combined use of the in-lens, in-body, and electronic image
stabilisers. (5-Axis Hybrid Image Stabiliser)
0 The [ ] on the recording screen changes to [ ]
while [E-Stabilization (Video)] is functioning.
0 The angle of view may become narrower if set to [ON].
[Boost I.S. (Video)]
Increases the effectiveness of the image stabiliser during
video recording.
This effect can help provide a stable composition when you
want to perform recording from a fixed perspective. (l 182)
[Anamorphic
(Video)]
You can switch to an image stabiliser that suits anamorphic
recording. (l 182)
[Lens Information]
When using a lens that does not have a communication
function with the camera, register the lens information in
the camera. (l 183)