15. Menu Guide
446
[Setup] menu ¨  [Monitor / Display]
[Monitor Settings]/
[Viewfinder]
[Brightness]/[Contrast]/[Saturation]/[Red Tint]/[Blue Tint]
This adjusts the brightness, colouring, and red or blue tints 
of the monitor/viewfinder.
1 Press 34 to select the setting item, and press 21 to 
adjust.
2 Press   or   to confirm the setting.
0 It will adjust the monitor when the monitor is in use, and 
the viewfinder when the viewfinder is in use.
[Monitor Backlight]/
[LVF Luminance]
`[AUTO]/[j3] to [i3]
Adjusts monitor/viewfinder luminance.
[AUTO]: The brightness is adjusted automatically 
depending on how bright it is around the camera.
0 Adjusts the monitor luminance when displaying the 
monitor, and the viewfinder luminance when displaying the 
viewfinder.
0 When either [AUTO] is set, or the adjusted value is set to 
positive side, the usage period will shorten.
0 When [Night Mode] is being used, [Monitor Backlight]/[LVF 
Luminance] are not available.
[Remaining Battery 
Level]
`[ ]/[%]
Switches the battery remaining level display between a bar 
and a percentage (%) display.