Panasonic Lumix S1H

15. Menu Guide
445
[Setup] menu ¨ [Monitor / Display]
[Power Save Mode]
[Sleep Mode] [10MIN.]/`[5MIN.]/[2MIN.]/[1MIN.]/
[OFF]
[Sleep Mode(Wi-Fi)] `[ON]/[OFF]
[Auto LVF/Monitor
Off]
`[5MIN.]/[2MIN.]/[1MIN.]/[OFF]
[Power Save LVF
Shooting]
[Time to Sleep]
[Method of Activation]
This is a function to automatically turn the camera to sleep
(power save) status or turn off the viewfinder/monitor if no
operation is performed for a set time.
0 For details, refer to page 46.
[Monitor Frame
Rate]
[30fps]/`[60fps]
Sets the display speed for live view on the monitor when
recording pictures.
[30fps]: Reduces the power consumption for a longer
operating time.
[60fps]: Enables smooth display of movements.
0 When the following functions are being used, [Monitor
Frame Rate] is not available:
– [6K/4K PHOTO]
– HDMI output
[LVF Frame Rate]
`[60fps]/[120fps]
Sets the display speed for live view on the viewfinder when
recording pictures.
[60fps]: Reduces the power consumption for a longer
operating time.
[120fps]: Enables smooth display of movements.
0 [LVF120] is displayed on the viewfinder when it is
displayed at [120fps].
0 When the following functions are being used, [LVF Frame
Rate] is not available:
– [6K/4K PHOTO]
– HDMI output