15. Menu Guide
456
How to Select an Image(s) in the [Playback] menu
Follow the steps below when the image selection screen is displayed.
0
When [Single] and [Multi] are not available, select an image in the same way as 
when [Single] is selected.
0 Images are displayed separately by card slot.
To switch the card to display, press [ ] and select the card slot.
0 You can only select images on one card at a time.
When [Single] has been selected
1
Press 21 to select the image.
2
Press   or  .
0
If [Set/Cancel] is displayed at the right 
bottom of the screen, the setting is 
cancelled when   or   is pressed 
again.
When [Multi] has been selected
1
Press 3421 to select the image and 
then press   or   (repeat).
0
The setting is cancelled when   or   
is pressed again.
2
Press [DISP.] to execute.
When [Protect] is selected
Press 3421 to select the image, and 
then press   or   to set (repeat).
0
The setting is cancelled when   or   is 
pressed again.
[Playback] Menu
0 Images recorded by another device may not be correctly played back or 
edited with the camera.
6HW
321
654
2.
ュリヴヱハ
321
654
6HW&DQFHO