7. Metering/Exposure/ISO Sensitivity
186
In [P] mode (Programme AE mode), the camera automatically sets the
shutter speed and aperture value for the brightness of the subject.
You can also use Programme Shift to change combinations of shutter
speed and aperture values while keeping the same exposure.
1
Set the mode dial to [P].
2
Press the shutter button
halfway.
≥This displays the aperture value A
and shutter speed value B on the
recording screen.
0
If the correct exposure is not achieved,
the aperture value and shutter speed
blink red.
3
Start recording.
Programme AE Mode
F4.060
To Next Page
Loading...
