7. Metering/Exposure/ISO Sensitivity
187
Programme Shift
You can change the shutter speed and aperture value combination set
automatically by the camera while maintaining the same exposure.
With this, you can, for example, make the background more defocused by
decreasing the aperture value or capture a moving subject more
dynamically by slowing the shutter speed.
1
Press the shutter button halfway.
0
This displays the aperture value and shutter speed value on the recording
screen. (Approx. 10 seconds)
2
Rotate or while the values are
displayed.
0
This displays the Programme Shift icon A
on the recording screen.
3
Start recording.
Cancelling Programme Shift
– Set the camera on/off switch to [OFF].
– Rotate or until the Programme Shift icon disappears.
0 Programme Shift is not available when using the following functions:
–Flash
– [6K/4K PHOTO]/[Post-Focus]
0 You can customise dial operations:
[] ¨ [ ] ¨ [Dial Set.] ¨ [Assign Dial (F/SS)]/[Rotation (F/SS)] (l 428)
0 The recording screen can display an exposure meter indicating the
relationship between aperture value and shutter speed:
[] ¨ [ ] ¨ [Expo.Meter] (l 436)
To Next Page
Loading...
