Panasonic Lumix S1H User Manual

9. Flash
234
[Firing Mode]/[Manual Flash Adjust.]
You can select whether to set the flash output automatically or manually.
1
Set the [Firing Mode].
≥ ¨ [ ] ¨ [ ] ¨
[Firing Mode]
2
(When set to [MANUAL])
Select [Manual Flash Adjust.]
and then press or .
0 Firing mode cannot be set when using a Flash (DMW-FL580L/DMW-FL360L/
DMW-FL200L: optional). It can be set only when using an external flash that
does not use a battery (supplied with some models of Panasonic digital
cameras).
[TTL] Sets flash output to be set automatically by the camera.
[MANUAL]
Sets the flash output manually.
0 With [TTL], you can record the images you want even
when recording dark scenes where the flash output
tends to become greater.
0 The flash output ([1/1], etc.) is displayed on the flash
icon of the recording screen.

Panasonic Lumix S1H Specifications

General

Sensor Type	Full-frame CMOS
Resolution	24.2MP
ISO Range	100-51200 (expandable to 50-204800)
Viewfinder	5.76 million-dot OLED
Sensor Size	35.6 x 23.8 mm
Lens Mount	L-Mount
Video Recording	6K/24p, 5.9K/30p, 4K/60p
Image Stabilization	5-axis in-body image stabilization
LCD Screen	3.2-inch, 2.33 million-dot touchscreen
Autofocus System	Contrast-detect DFD AF, 225-area
Connectivity	Wi-Fi, Bluetooth
Battery Life	Approx. 400 shots (CIPA standard)
Continuous Shooting	9 fps
Internal Recording	10-bit 4:2:2
Shutter Speed	1/8000 to 60 sec
Video Frame Rates	24p, 30p, 60p
Storage Media	Dual SD card slots (UHS-II compatible)
Weather Sealing	Yes