Panasonic Lumix S1H

10. Recording Videos
268
When [Rec. File Format] is set to [AVCHD] or [MOV], the time code is
automatically recorded during video recording. If [MP4], the time code is
not recorded.
Setting the Time Code
Sets the recording, display, and output of the time code.
1
Set [Rec. File Format] to
[AVCHD] or [MOV].
≥ ¨ [ ] ¨ [ ] ¨ [Rec. File
Format]
¨ [AVCHD]/[MOV]
2
Select [Time Code].
≥ ¨ [ ] ¨ [ ] ¨ [Time Code]
Time Code
[Time Code
Display]
Displays the time code on the recording screen/playback screen.
[Count Up]
[REC RUN]
Counts the time code only when recording
videos.
[FREE RUN]
Counts the time code also when video recording
is stopped and when the camera is turned off.
0 When the following function is being used, [Count Up] is fixed to
[REC RUN]:
– [Variable Frame Rate]