Panasonic Lumix S1H User Manual

9. Flash
238
You can use a Flash (DMW-FL580L/DMW-FL360L/DMW-FL200L:
optional) to record using a wireless flash.
You can separately control the firing of three flash groups and the flash
attached to the hot shoe of the camera.

Placing a Wireless Flash
Place the wireless flash with its wireless sensor facing the camera.
Recording Using a Wireless Flash
Placement example
When C is placed to erase the
shadow in the background of the
subject that the flash groups A and B
will create
Placement range
When DMW-FL360L is attached
0 The placement range serves as a guide for when recording with the camera
held horizontally. The range differs depending on the surrounding
environment.
0 We recommend using a maximum of three wireless flashes in each group.
0 If the subject is too close, communication light may affect the exposure.
You can reduce the effect by setting [Communication Light] to [LOW] or
lowering the output with a diffuser or similar device. (l 241)
A
B
C
5m
5m
7m
7m
50°50°
50°50°
30°30°
30°30°

Panasonic Lumix S1H Specifications

General

Sensor Type	Full-frame CMOS
Resolution	24.2MP
ISO Range	100-51200 (expandable to 50-204800)
Viewfinder	5.76 million-dot OLED
Sensor Size	35.6 x 23.8 mm
Lens Mount	L-Mount
Video Recording	6K/24p, 5.9K/30p, 4K/60p
Image Stabilization	5-axis in-body image stabilization
LCD Screen	3.2-inch, 2.33 million-dot touchscreen
Autofocus System	Contrast-detect DFD AF, 225-area
Connectivity	Wi-Fi, Bluetooth
Battery Life	Approx. 400 shots (CIPA standard)
Continuous Shooting	9 fps
Internal Recording	10-bit 4:2:2
Shutter Speed	1/8000 to 60 sec
Video Frame Rates	24p, 30p, 60p
Storage Media	Dual SD card slots (UHS-II compatible)
Weather Sealing	Yes