Panasonic Lumix S1H

9. Flash
239
1
Attach an external flash to the
camera. (l 228)
2
Set the wireless flashes to
[RC] mode and then place
them.
0 Set the channel and group for the
wireless flashes.
3
Enable the wireless flash
function of the camera.
≥ ¨ [ ] ¨ [ ] ¨ [Wireless]
¨ [ON]
4
Set [Wireless Channel].
0 Select the same channel as on the
wireless flash side.
5
Set [Wireless Setup].
0 Set the firing mode and flash output.