Panasonic Lumix S1H

15. Menu Guide
443
[Custom] menu ¨ [Lens / Others]
[Lens Focus
Resume]
[ON]/`[OFF]
The camera saves the focus position when you turn it off.
[Focus Ring
Control]
`[NON-LINEAR]/[LINEAR]
[SET] [90°] to [360°] (`[150°])/[Maximum]
Sets the amount of movement for focusing using the focus
ring. (When using supported lenses)
[NON-LINEAR]: Focus responds by accelerating according
to rotation speed of the focus ring.
[LINEAR]: Focus responds at a constant amount according
to the rotational angle of the focus ring.
[SET]: Sets the rotational angle of the focus ring for when
[LINEAR] is selected.
0 This menu item can be registered to the Fn button.
(l 367)
[Lens Information]
[Lens1] to [Lens12] (`[Lens1])
When using a lens that does not have a communication
function with the camera, register the lens information in the
camera.
0 This is linked with [Lens Information] in [Image Stabilizer]
under the [Photo] ([Others (Photo)]) menu.
0 For details, refer to page 183.
[Lens Info.
Confirmation]
`[ON]/[OFF]
When you have attached a lens that does not have a
communication function with this camera, a message asking
for confirmation of the lens information is displayed when
you turn on the camera.