10. Recording Videos
292
[Luminance Spot Meter]
Specify any spot on the subject to measure the luminance over a small
area.
1
Set [Luminance Spot Meter].
≥ ¨ [ ] ¨ [ ] ¨ [Luminance
Spot Meter] ¨ [ON]
2
Select the position where you
want to measure the
luminance.
≥Press 3421 to select and then
press or .
A Luminance value
0 Positions can be moved to the diagonal
directions using the joystick.
0 You can also change the position by dragging the frame on the recording
screen.
0 To return the position back to the centre, press [DISP.].
Measurement Range
Measuring is possible in the range j7% to 109% (IRE).
0
When [Photo Style] is set to [V-Log], this can be measured with Stop units.
(Calculated as 0 Stop=42% (IRE))
0 You can register functions to Fn buttons:
[] ¨ [ ] ¨ [Fn Button Set] ¨ [Setting in REC mode] ¨ [Luminance
Spot Meter] (l 367)
65%
65%
To Next Page
Loading...
