Panasonic Lumix S1H

185
7. Metering/Exposure/ISO
Sensitivity
Type of optical measurement to measure brightness can be changed.
¨ [ ] ¨ [ ] ¨ Select [Metering Mode]
[Metering Mode]
[](Multi-metering)
Method in which the most suitable exposure is
measured by judging the allocation of brightness on
the whole screen.
[]
(Centre-
weighted)
Method used to perform measuring which focuses on
the centre of the screen.
[](Spot)
Method used to measure the
extremely small part around the
spot-metering target A.
0 When you move the AF area, the
spot metering target also moves to
match.
[]
(Highlight-
weighted)
Method used to perform measuring which focuses on
the highlighted parts of the screen to prevent
overexposure.
This is suitable for theatre photography, etc.
0 You can register functions to Fn buttons:
[] ¨ [ ] ¨ [Fn Button Set] ¨ [Setting in REC mode] ¨ [Metering Mode]
(l 367)
0 The standard value for correct exposure can be adjusted:
[] ¨ [ ] ¨ [Exposure Offset Adjust.] (l 419)