3
îš™
Symbols Used in This Document
Symbols for recording modes, pictures, and videos that can be used
In this document, symbols are placed at the start of functional explanations (recording
modes, pictures, and videos) showing conditions in which these functions can be
used.
Black icons show conditions in which these can be used, and grey icons show
conditions in which these cannot be used.
Example: /
Operating symbols
In this document, camera operation is explained using the following symbols:
0 For information about operation methods of the operation part, refer to page 64.
0 Other symbols, such as icons shown on the camera screen, are also used in
explanations.
0 This document describes the procedure for selecting menu items as follows:
Example) Set [Picture Quality] of the [Photo] ([Image Quality]) menu to [STD.].
For information about menu operation methods, refer to page 77.
About Operating Instructions
A Front dial
B Rear dial
C 3421
Cursor button up/down/left/right
or
Joystick up/down/left/right
D Press the centre of the joystick
E [MENU/SET] button
F Control dial
¨ [ ] ¨ [ ] ¨ [Picture Quality] ¨ Select [STD.]
To Next Page
Loading...
Need help?
General
