Panasonic Lumix S1H

14. Camera Customisation
389
Saves the camera’s settings information to the card.
Saved settings information can be loaded to the camera, letting you set the
same settings on multiple cameras.
¨ [ ] ¨ [ ] ¨ Select [Save/Restore Camera Setting]
[Save/Restore Camera Setting]
[Save]
Saves the camera’s settings information to the card.
0 If saving new data, then select [New File], and if overwriting an
existing file, select that existing file.
0 When [New File] is selected, a screen to select the file name
to save as is displayed.
[OK] Saves using the file name on the screen.
[Change the file
name]
Changes the file name and saves the file.
0 Available characters: alphabetic
characters (upper-case), numerals, up
to 8 characters
0 For information on how to enter
characters, refer to page 464.
[Load]
Loads the settings information on the card and copies it to the
camera.
[Delete] Deletes settings information on the card.
[Keep Settings
While Format]
When formatting the card, formats the card while keeping
camera settings information stored on the card.
0 Only settings information from the same model can be loaded.
0 Up to 10 instances of settings information can be saved on one card.
0 List of functions for which saving of settings information is possible (l 587)