Panasonic Lumix S1H User Manual

8. White Balance/Image Quality
207

Registering the White Set ([ ] to [ ])
Take pictures of a white object under the light source of the recording
location to adjust the white balance until it appears white.
1
Press [WB] and then select any value from [ ] to [ ].
2
Press 3.
3
Aim the camera at a white object so that it appears inside the frame at
the centre of the screen and then press or .
0
This will set the white balance and return you to the recording screen.

Colour Temperature Setting ([ ] to [ ])
Set the numeric value for the white balance colour temperature.
1
Press [WB] and then select any value from [ ] to [ ].
2
Press 3.
0
The colour temperature setting screen is displayed.
3
Press 34 to select the colour temperature and then press or
.
0
You can set the White Balance Bracket (Colour Temperature) by rotating ,
or . (l 165)
0 You can set a colour temperature from [2500K] to [10000K].
1
4
1
4
1
4
1
4

Panasonic Lumix S1H Specifications

General

Sensor Type	Full-frame CMOS
Resolution	24.2MP
ISO Range	100-51200 (expandable to 50-204800)
Viewfinder	5.76 million-dot OLED
Sensor Size	35.6 x 23.8 mm
Lens Mount	L-Mount
Video Recording	6K/24p, 5.9K/30p, 4K/60p
Image Stabilization	5-axis in-body image stabilization
LCD Screen	3.2-inch, 2.33 million-dot touchscreen
Autofocus System	Contrast-detect DFD AF, 225-area
Connectivity	Wi-Fi, Bluetooth
Battery Life	Approx. 400 shots (CIPA standard)
Continuous Shooting	9 fps
Internal Recording	10-bit 4:2:2
Shutter Speed	1/8000 to 60 sec
Video Frame Rates	24p, 30p, 60p
Storage Media	Dual SD card slots (UHS-II compatible)
Weather Sealing	Yes