8. White Balance/Image Quality
212
0 In [iA] mode, operation differs from that in other recording modes.
– [Standard] or [Monochrome] can be set.
– The setting will be reset to [Standard] when the camera is switched to
another recording mode or it is turned off.
– Image quality cannot be adjusted.
0 The range of available ISO sensitivities is different when [Photo Style] is set to
the following:
– [Cinelike D2], [Cinelike V2]: Down to a lower limit of [200]
(The lower limit changes to [100] when [Extended ISO] is set.)
The range of available ISO sensitivities is also different for [LOW] and [HIGH]
in [Dual Native ISO Setting].
Reset the exposure if necessary when ISO sensitivity changes.
0 You can set the knee mode with [Like709].
For details, refer to page 280.
0 When [Filter Settings] is being used, [Photo Style] is not available.
0 You can register functions to Fn buttons:
[] ¨ [ ] ¨ [Fn Button Set] ¨ [Setting in REC mode] ¨ [Photo Style]
(l 367)
0 You can make detailed Photo Style settings:
[] ¨ [ ] ¨ [Photo Style Settings] (l 418)
To Next Page
Loading...
