Panasonic Lumix S1H User Manual

8. White Balance/Image Quality
220

Setting the Colour to Be Left ([One Point Color])
1
Set [Filter Effect] to [One Point Color].
2
Press 3 to display the setting screen.
0
The setting screen can also be displayed by touching [ ] then [ ].
3
Press 3421 to move the frame and
select the colour you want to leave.
0
Positions can be moved to the diagonal
directions using the joystick.
0 You can also select the colour you want to
leave by touching the screen.
0 To return the frame back to the centre,
press [DISP.].
4
Press or to set.

Setting the Light Source Position and Size ([Sunshine])
1
Set [Filter Effect] to [Sunshine].
2
Press 3 to display the setting screen.
0
The setting screen can also be displayed by touching [ ] then [ ].
3
Press 3421 to move the centre
position of the light source.
0
Positions can be moved to the diagonal
directions using the joystick.
0 The position of the light source can also be
moved by touching the screen.
4
Rotate , or to adjust the
size of the light source.
0
This can also be enlarged/reduced by pinching out/pinching in the screen.
0 To reset the light source setting to the default, press [DISP.].
5
Press or .

Panasonic Lumix S1H Specifications

General

Sensor Type	Full-frame CMOS
Resolution	24.2MP
ISO Range	100-51200 (expandable to 50-204800)
Viewfinder	5.76 million-dot OLED
Sensor Size	35.6 x 23.8 mm
Lens Mount	L-Mount
Video Recording	6K/24p, 5.9K/30p, 4K/60p
Image Stabilization	5-axis in-body image stabilization
LCD Screen	3.2-inch, 2.33 million-dot touchscreen
Autofocus System	Contrast-detect DFD AF, 225-area
Connectivity	Wi-Fi, Bluetooth
Battery Life	Approx. 400 shots (CIPA standard)
Continuous Shooting	9 fps
Internal Recording	10-bit 4:2:2
Shutter Speed	1/8000 to 60 sec
Video Frame Rates	24p, 30p, 60p
Storage Media	Dual SD card slots (UHS-II compatible)
Weather Sealing	Yes