Panasonic Lumix S1H

8. White Balance/Image Quality
223
3
Decide on the composition
and then fix the camera in
place.
0 If blurring is detected, the High
Resolution mode icon A blinks.
4
Start recording.
≥Press the shutter button fully.
0
With the default settings, [Shutter Delay]
is activated, so there will be a gap in time
from when the shutter button is pressed
until the shutter is released.
0 The screen goes dark during recording.
0 The recording state indication (red) B
blinks.
Do not move the camera while it is blinking.
0 You can continue recording when the merging process ends.
5
End [High Resolution Mode].
≥Press [Q].
ḟࡢ᧜ᙳ