Panasonic Lumix S1H

10. Recording Videos
294

When [BASE/RANGE] Was Selected with [SET]
Centred on the brightness set with [Base Level], parts with the brightness
in the range set in [Range] are displayed with the stripes.
≥[Base Level] can be set in the range between 0% and 109% (IRE).
≥[Range] can be set in the range between n1% and n10% (IRE).
0
When [Photo Style] is set to [V-Log], these are set at Stop units. (Calculated as
0 Stop=42% (IRE))
0 [ZEBRA1+2] cannot be selected while you are setting [BASE/RANGE].
0 You can register functions to Fn buttons:
[] ¨ [ ] ¨ [Fn Button Set] ¨ [Setting in REC mode] ¨ [Zebra Pattern]
(l 367)