11. Special Video Recording
303
0 Maintain the same distance to the subject after setting the focus position.
0 The moving speed of focus varies depending on the lens being used.
0 While using [Focus Transition], it is not possible to focus on anything other
than the registered focus position.
0 Any of the operations below will clear the focus position settings.
– Operating the camera on/off switch
– Zoom operation
– Switching the focus mode
– Switching the recording mode
– Replacing the lens
0 When the following functions are being used, [Focus Transition] is not
available:
– [Variable Frame Rate]
– [Live Cropping]
0 [Focus Transition] cannot be used when using an interchangeable lens that
does not support the focus mode [AFC].
0 You can register functions to Fn buttons:
[] ¨ [ ] ¨ [Fn Button Set] ¨ [Setting in REC mode] ¨ [Focus
Transition] (l 367)
To Next Page
Loading...
