Panasonic Lumix S1H User Manual

12. Connections with External Devices (Video)
334

[iA]/[P]/[A]/[S]/[M] Mode
Output is the same as [ ] mode during video recording or when [Video-
Priority Display] is set to [ON].
Output is with a 16:9 aspect ratio during recording standby. Resolution,
frame rate, YUV, and bit value output matches the connected device.

Notice Regarding HDMI Output
0 It may take some time for the output method to change.
0 When you use the HDMI output during recording, the image may be displayed with a
time lag.
0 Beep sounds, AF beep, and electronic shutter sounds are muted during HDMI
output.
0 When you check the image and audio from the TV connected to the camera, the
microphone of the camera may pick up the sound from the speakers of the TV,
producing an abnormal sound (audio feedback).
If this occurs, move the camera away from the TV or lower the volume on the TV.
0 Certain setting screens are not output via HDMI.
0 There is no output via HDMI while you are using the following functions:
– [6K/4K PHOTO]/[Post-Focus]
0 When set to any [Aspect Ratio] other than 16:9, bands are added to the
images and they are output with a 16:9 aspect ratio.

Panasonic Lumix S1H Specifications

General

Sensor Type	Full-frame CMOS
Resolution	24.2MP
ISO Range	100-51200 (expandable to 50-204800)
Viewfinder	5.76 million-dot OLED
Sensor Size	35.6 x 23.8 mm
Lens Mount	L-Mount
Video Recording	6K/24p, 5.9K/30p, 4K/60p
Image Stabilization	5-axis in-body image stabilization
LCD Screen	3.2-inch, 2.33 million-dot touchscreen
Autofocus System	Contrast-detect DFD AF, 225-area
Connectivity	Wi-Fi, Bluetooth
Battery Life	Approx. 400 shots (CIPA standard)
Continuous Shooting	9 fps
Internal Recording	10-bit 4:2:2
Shutter Speed	1/8000 to 60 sec
Video Frame Rates	24p, 30p, 60p
Storage Media	Dual SD card slots (UHS-II compatible)
Weather Sealing	Yes