Panasonic Lumix S1H

2. Getting Started
37
1
Connect the charger and the
AC adaptor with the USB
connection cable (C–C).
0 Hold the plugs and insert them straight
in or pull them straight out.
(Inserting these at an angle may cause
deformation or malfunction)
2
Connect the AC mains lead to
the AC adaptor and then
insert into the electrical
outlet.
3
Insert the battery.
≥Insert the terminal end of the
battery and push.
≥The [CHARGE] light A blinks and
charging begins.
0 Do not use any other USB connection cables except the supplied USB
connection cable (C–C).
This may cause malfunction.
0 Do not use any other AC adaptors except the supplied one.
This may cause malfunction.
0 Do not use any other AC mains leads except the supplied one.
This may cause malfunction.



