Panasonic Lumix S1H User Manual

16. Wi-Fi/Bluetooth
476
Manually entering a password to connect
1
Display the screen in Step
2
on page 475.
2
In the setting menu of the smartphone,
turn the Wi-Fi function ON.
3
On the Wi-Fi setup screen, select the
SSID B displayed on the camera.
4
(At the first connection)
Enter the password B displayed on the
camera.
5
On the smartphone, start up “LUMIX
Sync ”.
0 (iOS devices) If the Wi-Fi connection fails, follow the message displayed to
allow connection to the camera. If you still cannot connect, select the SSID of
the camera on the Wi-Fi setup screen of the smartphone to connect. If the
SSID is not displayed, turn off and on the camera, then perform the Wi-Fi
connection settings again.
Wi-Fi
Wi-Fi
XXXXXXXX
i
i

Panasonic Lumix S1H Specifications

General

Sensor Type	Full-frame CMOS
Resolution	24.2MP
ISO Range	100-51200 (expandable to 50-204800)
Viewfinder	5.76 million-dot OLED
Sensor Size	35.6 x 23.8 mm
Lens Mount	L-Mount
Video Recording	6K/24p, 5.9K/30p, 4K/60p
Image Stabilization	5-axis in-body image stabilization
LCD Screen	3.2-inch, 2.33 million-dot touchscreen
Autofocus System	Contrast-detect DFD AF, 225-area
Connectivity	Wi-Fi, Bluetooth
Battery Life	Approx. 400 shots (CIPA standard)
Continuous Shooting	9 fps
Internal Recording	10-bit 4:2:2
Shutter Speed	1/8000 to 60 sec
Video Frame Rates	24p, 30p, 60p
Storage Media	Dual SD card slots (UHS-II compatible)
Weather Sealing	Yes