16. Wi-Fi/Bluetooth
481
0 The default setting is [Camera].
[Shutter Remote Control]
You can use the smartphone as a remote control for the shutter.
Getting started:
0 Connect the camera to a smartphone by Bluetooth. (l 469)
0 On the smartphone, start up “LUMIX Sync ”.
1
Select [ ] ([Shutter Remote Control]) in the home
screen.
2
Start recording.
[Camera]
Operation is possible on both the camera and the
smartphone.
0 The camera’s dial settings, etc. cannot be changed
with the smartphone.
[Smartphone]
Operation is possible only on the smartphone.
0 The camera’s dial settings, etc. can be changed with
the smartphone.
0 To end remote recording, press any of the buttons
on the camera to turn on the screen, and select
[End].
0 The setting of this function cannot be changed while the connection is active.
Starts/ends the video recording
Takes a picture
0 Bulb recording (l 482)
LOCK
To Next Page
Loading...
