18. Materials
574
îš™
Charger, AC Adaptor
0 The [CHARGE] light may blink under the influence of
static electricity or electromagnetic wave, depending on
the charging environment. This phenomenon has no
effects on charging.
0 If you use the battery charger near a radio, the radio
reception may be disturbed.
Keep the charger 1 m (3.3 feet) or more away from
radio.
0 During usage, the AC adaptor may emit an electrical hum; this is not a malfunction.
0 After use, be sure to disconnect the power plug from the electrical outlet.
(A very small amount of current is consumed if it is left connected.)
0 Keep the contacts A of the charger and battery clean.
Wipe them with a dry cloth if they get dirty.
îš™
Card
Do not leave the card in areas with high temperatures, direct sunlight,
or areas prone to electromagnetic waves and static.
Do not bend or drop the card.
Do not subject the card to strong vibration.
0
Otherwise, the card and recorded data may be damaged.
0 Put the card in the card case or the storage bag after use and when storing or
carrying the card.
0 Do not allow dirt, water or other foreign objects to get into the contacts on the card.
Additionally, do not touch the contacts with your hands.
Points to remember when disposing of/transferring the memory card
Format or delete using the camera or a PC will only modify the file management
information, so it will not delete the data in the card completely.
We recommend physically destroying the card or using commercially available PC
data deletion software to delete the card data completely when disposing of/
transferring the card.
You are responsible for handling of data on cards.
To Next Page
Loading...
Need help?
General
