Panasonic PT-REQ15 - Page 223

Chapter 5 Operations — Using the web control function
ENGLISH - 223
[User account]
Set the user name, password and the display setting of remote preview function of the standard user account
without administrator rights.
Click [User account].
1
2
3
4
5
1 [New username]:
Enter the desired new user name. (Up to 16 characters in single
byte)
2 [New password]:
Enter the desired new password. (Up to 16 characters in single
byte)
3 [New password (re-enter)]:
Enter the desired new password again.
4 [Display setting]
[Remote preview]
[Disable]:
Disable (Hide) the remote preview function for the user account.
[Enable]:
Enable (Display) the remote preview function for the user
account.
5 [Save]
Determines the change of standard user account.
[Account set up] (when accessed by standard user account)
Changes the password of the standard user account.
1
2
3
1 [New password]:
Enter the desired new password. (Up to 16 characters in single
byte)
2 [New password (re-enter)]:
Enter the desired new password again.
3 [Save]
Determines the change of password.