Panasonic PT-REQ15 - Page 256

Chapter 5 Operations — Using the web control function
256 - ENGLISH
r [Auto Discovery]
Set the standby process against the search protocol of the control system and the application software.
1
1 [Auto Discovery]
[Disable]:
Disables the standby process.
[Enable]:
Enables the standby process and enables the automatic
detection of the projector.
r [XiO Cloud]
Congure the setting to manage the devices using the XiO Cloud.
1
1 [XiO Cloud]
[Disable]:
Disables the XiO Cloud function.
[Enable]:
Enables the XiO Cloud function.
r [Proxy]
Congure the proxy server setting.
1
2
3
1 [Proxy]
[Disable]:
Does not use the proxy server.
[Enable]:
Uses the proxy server.
2 [Proxy Server Name]
Enter the proxy server name or the IPv4 address.
3 [Proxy Server Port]
Enter the port number of the proxy server.
Note
f [Proxy Server Name] does not support the IPv6 address.